Mixture Aerosols Filtration on Filters with Wide Fibre Diameter Distribution — Comparison with Theoretical and Empirical Models
Abstract A methodology for calculating aerosol filtration efficiency using non-woven filters with polydispersity distribution of fibre diameters was formulated. In order to verify the results of the calculations experimentally, filters made of polypropylene non-woven fabric were used to filter solid...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Springer
2022-04-01
|
| Series: | Aerosol and Air Quality Research |
| Subjects: | |
| Online Access: | https://doi.org/10.4209/aaqr.220039 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Abstract A methodology for calculating aerosol filtration efficiency using non-woven filters with polydispersity distribution of fibre diameters was formulated. In order to verify the results of the calculations experimentally, filters made of polypropylene non-woven fabric were used to filter solid (soot) and liquid (oil) aerosols and their mixtures with different concentrations. In order to increase the accuracy of the calculations, the division of the diameter distribution into several (1–100) ranges of values was considered. The influence of the number of these intervals for theoretical and empirical equations available in the literature was investigated. This effect was found to be significant, and replacing one diameter value representing all the fibres in the filter with twenty diameter ranges, each representing only a fraction of the total fibres, is sufficient to minimize the error due to the underrepresentation of the actual fibre distribution in the filter. Calculation of the mean particle size after the filter was performed using a set of theoretical and empirical equations. The calculations take into account the change in packing density, flow velocity and fibre diameter over time as a result of filling the filter with particles deposited on it. The obtained results were compared with the measurement results. It has been found that such changes in the monofilament performance model are insufficient to properly describe the effects inside the filter. |
|---|---|
| ISSN: | 1680-8584 2071-1409 |