Study on hot deformation behavior of 9Cr18Mo stainles bearing steel
The microstructure evolution and hot deformation behavior of 9Cr18Mo stainless bearing steel were studied with the hot compression test at the temperature ranging from 1 223 to 1 423 and strain rates from 0.01 to 10 s-1. The results indicate that the 9Cr18Mo stainless steel shows strong positive str...
Saved in:
Main Authors: | ZHANG Yu, WANG Jianguo, LIU Dong, LIANG Zhirui, ZHAO Jiahang |
---|---|
Format: | Article |
Language: | zho |
Published: |
EDP Sciences
2024-12-01
|
Series: | Xibei Gongye Daxue Xuebao |
Subjects: | |
Online Access: | https://www.jnwpu.org/articles/jnwpu/full_html/2024/06/jnwpu2024426p1071/jnwpu2024426p1071.html |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Effect of deformation temperature on microstructure and corrosion properties of hot-compressed 347H stainless steel
by: Qiushuang Wang, et al.
Published: (2025-02-01) -
Evaluation of the ratcheting behavior of Cr-Mo steel used in CNG tank
by: Karim Aliakbari, et al.
Published: (2025-03-01) -
Microstructures and mechanical properties of a 30CrNi2MoV steel/GH4098 joint produced by hot-compression bonding
by: Shengqing Wu, et al.
Published: (2025-03-01) -
Flow stress-strain curves and dynamic recrystallization behavior of high carbon low alloy steels during hot deformation
by: D.Z. Li, et al.
Published: (2025-03-01) -
Protection of stainless steel surfaces in desalination units against corrosion during acid cleaning under dynamic conditions by using lavender angustifolia extract as a green inhibitor
by: M. A. Deyab, et al.
Published: (2025-02-01)