„WASHING HEAD HOUSING” 3D PRINTING FROM FA 100 DRILLING INSTALLATION, USING PETG FILAMENT
In this work, we proposed 3D printing additive manufacturing, using Fused Deposition Modeling technology for the washing head housing, which is common for water drilling installations FA100, FA125, FH150 and FG40. Due to the common use of this washing head for the water drilling installations FA1...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Academica Brancusi
2023-05-01
|
| Series: | Fiabilitate şi Durabilitate |
| Subjects: | |
| Online Access: | https://www.utgjiu.ro/rev_mec/mecanica/pdf/2023-01/20_Fica%20S%20A,%20Babis%20C,%20Dimitrescu%20A%20-%20Washing%20head%20housing%203D%20priting%20from%20FA%20100%20Drilling%20installation,%20using%20PETG%20filament.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | In this work, we proposed 3D printing additive manufacturing, using Fused
Deposition Modeling technology for the washing head housing, which is common for water
drilling installations FA100, FA125, FH150 and FG40. Due to the common use of this washing
head for the water drilling installations FA100, FA125, FH150 and FG40, we use the generic
name "FA100 Washing Head". We use 3D printing technology because, on the one hand, it is
technically possible to make the part and on the other hand, for economic reasons. It is
approximately ten times cheaper to make the part through 3D printing than through conventional
technologies
|
|---|---|
| ISSN: | 1844-640X 2344-3669 |